Indian rupee (₹) - INR
₹18,499.00
The ZDrive Next N618 (170KV) is a high-performance heavy-lift motor built to power large UAVs requiring precision control and consistent torque output. Weighing 380 g, it features a 72 × 41.4 mm body, optimized for 6S–12S (up to 14S) LiPo systems, and delivers exceptional thrust efficiency.
Its robust build, low KV rating, and optimized torque curve make it ideal for aerial logistics, inspection drones, and professional-grade cinematography platforms where power and balance are essential.
The ZDrive Next N618 (170KV) provides powerful thrust output and remarkable energy efficiency for large-scale UAV systems. Generating up to 13.3 kg of thrust with 4.28 Nm torque, it combines brute lifting strength with precise control response, ideal for professional and industrial drone applications.
Equipped with 180°C high-grade copper windings and 150°C Neodymium magnets, the motor withstands sustained power loads without compromising efficiency. Its 48 mΩ internal resistance promotes efficient current flow with minimal heat accumulation. Each rotor is balanced within ≤5 mg, reducing vibrations and enhancing overall flight control, making it a preferred choice for stability-critical drone builds.
| Motor Size | D:72 x 41.4 mm |
|---|---|
| Propeller Mounting Holes | D:12 M3×4, D:18 M3×4, D:22 M3×4 |
| Shaft Diameter | IN: 6 mm |
| IP rating | 45 |
| Varnished wire Degree | 180°C |
| Magnet Degree | 150°C |
| Rotor Balance | ≤5 mg |
| Motor Mounting Holes | D:25 M3x4 |
| No Load Current | 1.6A/ 30V |
|---|---|
| Motor Weight | 380 g |
| Maximum Current | 73.1 A |
| Maximum thrust | 13.3 kg |
| Nominal Voltage | 12S lipo battery |
| Internal Resistance | 48mΩ |
| Maximum Power | 3429W |
| Maximum Torque | 4.28 Nm |
The N618 is engineered for mission-critical UAVs that demand both torque and endurance. Its low-KV architecture ensures efficient use of large propellers, delivering high thrust at moderate RPMs for longer flight durations. Built with aerospace-grade materials and tight manufacturing tolerances, the N618 guarantees smooth operation, durability, and thermal control even during extended operation.
It’s ideal for cargo drones, survey UAVs, and cinematic rigs, where power, efficiency, and stability directly impact flight performance and payload capacity.
Each ZDrive Next N618 motor is meticulously constructed to meet the highest industrial standards:
For best results and motor longevity:
Maintain performance and reliability with proper care:
The N618 is designed for large-scale, heavy-lift drones used in cargo transport, survey operations, and aerial cinematography, where sustained thrust and efficiency are essential.
Under optimal voltage and propeller setup, the motor delivers up to 13.3 kg of thrust, maintaining smooth torque across the throttle range.
The N618 performs exceptionally with 10S–12S LiPo systems, though it supports a full range from 5S to 14S for flexible integration.
The low KV design produces higher torque at lower RPM, improving lift efficiency, flight stability, and temperature control, especially for large propellers.
Yes, with 180°C copper windings, 150°C magnets, and robust thermal dissipation, it’s built to perform reliably during extended missions and under heavy payloads.
Regularly inspect propellers and bearings, ensure adequate airflow, and keep the motor clean and lubricated to maintain smooth, vibration-free operation.
