ZX80 Ultra-Heavy Lift Integrated Propulsion System

₹16,999.00

Indian rupee (₹) - INR

Indian rupee (₹) - INR
United States dollar ($) - USD
Canadian dollar ($) - CAD

The ZX80 propulsion system combines a high-torque 80-series motor, a professional-grade FOC vector controller, and enhanced cooling architecture to provide stable, efficient thrust for large UAVs. With a 600 g motor module, a 40 mm tube mount, and up to 15 kg lift capability, it enables powerful performance for aerial delivery drones, inspection craft, agriculture platforms, and high-end cinematography rigs requiring elevated payload capacity.

The ZX80 is engineered with an 81 × 20 mm motor stator, optimized magnetic flow, and high stability torque output to deliver powerful thrust with smooth RPM transitions. Its integrated FOC vector-controlled ESC ensures superior efficiency, quiet operation, and precise control dynamics compared to standard ESC-motor combinations.

The design includes:

Industrial-grade heat dissipation system for continuous high load
High-stability rotor assembly for low vibration and clean sensor data
PWM + CAN protocol support for flexible autopilot integration
High voltage headroom for responsive performance at maximum loads

Engineered for harsh field environments, the ZX80 provides consistent power output and reliable operation during extended missions.

Armset Weight	962 ± 10g(Prop excluded)
Maximum thrust	15kg
IP rating	X6
Communication Protocol	PWM+CAN
Lithium Compatible	12-14S (Lipo)
Tube Diameter	40mm
Takeoff Weight Per Rotor	5-7 kg
Control Type	FOC Vector Control

Motor Stator Size	81*20mm
MAX Voltage	61 V
Current (short time)	80 A
Motor Weight	600g
MAX Signal Frequency	50-500 Hz
Working Pulse Width	1050-1950us

The ZX80 is a high-power, industrial-grade integrated propulsion system built for heavy-lift multirotors, large VTOL platforms, and professional UAV applications. Delivering up to 15 kg thrust with exceptional thermal stability and precise FOC control, it is engineered for demanding missions where strength, efficiency, and reliability are essential.

Key Features

Up to 15 kg thrust for heavy-lift drone configurations
Integrated FOC vector control for quiet, smooth, and efficient operation
Supports 12S–14S LiPo power systems
40 mm tube mount for strong and stable installation
600 g high-torque propulsion module
Wide control input support (PWM + CAN)
Low-noise, low-vibration motor architecture
High-efficiency cooling channels for continuous heavy load
Optimized for large 27–30 inch propellers

Motor & ESC Details

Stator Size: 81 × 20 mm
Motor Weight: 600 g
Max Voltage: 61 V
Short Burst Current: 80 A
Signal Frequency Range: 50–500 Hz
Working Pulse Width: 1050–1950 μs
Control Type: FOC Vector Control
Communication: PWM + CAN

Build & Materials

Aircraft-grade CNC aluminum housing
High-temperature Neodymium magnet system
180°C-rated copper windings
Dual high-precision bearings for low-resistance rotation
Optimized stator ventilation for better cooling
IP-rated assembly for outdoor, dusty, or humid operation
Rotor dynamically balanced to reduce vibration

Specifications (160KV Class)

Armset Weight: 962 ± 10 g (excluding propeller)
Maximum Thrust: 15 kg
IP Rating: X6
Tube Diameter: 40 mm
Takeoff Weight per Rotor: 5–7 kg
Battery Compatibility: 12S–14S LiPo
Control Protocols: PWM + CAN

Technical Tips for Best Performance

Use with 27–30 inch carbon fiber propellers for optimal lift.
Ensure tube clamp is tightened evenly to reduce vibration.
Avoid sharp throttle changes at full load for better thermal stability.
Allow airflow across the motor body for sustained heavy hover operations.
For CAN mode, follow correct ID assignment for smooth ESC-FC communication.
Pre-check propeller integrity before every mission.

Safety & Maintenance

Inspect bearings regularly, especially after long hover flights.
Keep motor housing clean to maintain cooling efficiency.
Never exceed 61 V operating voltage.
Maintain propeller balance to avoid vibration.
Keep ESC firmware updated for stable FOC control.
Store the module in dry conditions to avoid moisture damage.

FAQs

It is ideal for heavy-lift multirotors, VTOL lift systems, and industrial UAVs needing high thrust output.

The system delivers up to 15 kg of thrust with recommended propellers.

Yes, a FOC vector-controlled ESC is integrated for superior efficiency and smoother throttle response.

Large 27–30 inch carbon fiber propellers are recommended.

Yes, it supports both CAN and PWM for versatile integration with flight controllers.

Yes, the motor features advanced cooling and high-temperature materials designed for long hover durations.

Between 5–7 kg per motor, depending on application and prop configuration.